下载中心

LightX-AE 6.0.4.74

Exit the old application before upgrading
- The in-app updater now closes LightX on both Windows and Qt Mac after the existing Save/Discard/Cancel check and a successful installer launch or DMG open request. Canceling the save or failing to start the installer keeps LightX open.
- The Windows installer now honors the updater process ID and waits up to 30 seconds for the old LightX process to exit before replacing files. If exit cannot be confirmed, installation stops without writing the new application files. It does not force-terminate LightX.
- Manual Windows upgrades retain the normal application-close prompt and explicitly check LightX.exe and its runtime DLLs in the selected installation folder.

Qt Mac installation
- Opening the DMG now exits the old Qt LightX application after the save check. You still need to copy LightX.app into Applications and replace the old app, then launch the new version. Opening the DMG alone does not install the update.

Project compatibility
- No changes to RJX projects, captured frames, controller BIN data or licensing. Text toolbar and color-palette improvements from 6.0.4.73 remain included.

Platforms: Windows x64 and LightX Qt for Apple Silicon Mac (macOS 14 or later).

LightX-AE 6.0.4.74

Exit the old application before upgrading
- The in-app updater now closes LightX on both Windows and Qt Mac after the existing Save/Discard/Cancel check and a successful installer launch or DMG open request. Canceling the save or failing to start the installer keeps LightX open.
- The Windows installer now honors the updater process ID and waits up to 30 seconds for the old LightX process to exit before replacing files. If exit cannot be confirmed, installation stops without writing the new application files. It does not force-terminate LightX.
- Manual Windows upgrades retain the normal application-close prompt and explicitly check LightX.exe and its runtime DLLs in the selected installation folder.

Qt Mac installation
- Opening the DMG now exits the old Qt LightX application after the save check. You still need to copy LightX.app into Applications and replace the old app, then launch the new version. Opening the DMG alone does not install the update.

Project compatibility
- No changes to RJX projects, captured frames, controller BIN data or licensing. Text toolbar and color-palette improvements from 6.0.4.73 remain included.

Platforms: Windows x64 and LightX Qt for Apple Silicon Mac (macOS 14 or later).

RJ-16000 实时演示支持按各端口实际接线灯数传输，减少空端口和未使用尾部数据。需配套 RJ-16000 2.5.24 固件；旧固件继续使用原有完整帧协议。
设备完整收帧并校验后逐端口补零，沿用现有 FPGA 输出流程。保留黑色灯点、RGB 顺序设置和旧协议兼容。RJ-1000、RJ-8000、工程与 BIN 格式保持现有行为。
本轮已通过软件定向验证，现场播放表现仍取决于配套固件、布线与无线环境。

新增文字属性工具栏、字体搜索及预览；字体颜色直接展开圆形色盘，支持亮度、不透明度、HEX/RGB、常用色及取消/应用。修复设计颜色被动画或综合效果影响，以及部分灯点参照位置偏移。统一原工程已保存的采集色帧提示。保留软件内升级。

【测试候选固件；未完成设备 OTA 验收，未批准量产发布】
RJ-16000 实时演示支持与 LightMX 1.2.3+96 协商按各物理端口实际灯数传输，减少空端口及未使用尾部数据。ESP 完整收帧并校验 CRC 后逐端口补零到 1024 灯，沿用既有 FPGA 输出、三槽缓存及输出节奏。保留旧 App 的完整帧兼容；FPGA、SD/BIN 格式和 RJ-1000 通道不变。保留 2.5.23 回退。软件定向检查通过，实机连续播放、无线吞吐及 OTA 验收仍待完成。

【测试候选固件；未完成设备 OTA 验收，未批准量产发布】
仅适用 RJ-1000 单口 A39C Wi-Fi（RJ1000_A39C_WIFI_V1）。搭配 LightMX 1.2.3+95，实时演示按实际接线灯数传输并输出，支持1–1024灯；330灯RGB负载990字节，保留黑色像素，不按亮灯数裁剪。切换到较短输出前清除旧尾部；按线速限制物理帧率并修正过期节拍等待，保留2.5.19异常记录与恢复。旧App/v1继续2048灯完整帧，旧UDP、文件/SD、HTTP OTA、分区及签名不变。RJ-16000仍由App补齐完整帧，固件与FPGA不变。本版签名构建及定向主机测试通过，手机、330灯流畅度及真实设备输出待验收，不承诺所有灯数50 FPS。升级前移除SD根目录旧升级BIN。

【测试候选固件；未完成设备 OTA 验收，未批准量产发布】
RJ-G2(A39C)无线模块固件，文件格式V1 湖南常用。

【测试候选固件；未完成设备 OTA 验收，未批准量产发布】
AS32无线模块，文件格式是RJ-FSD-1000，升级时把固件放到SD中，开电后可以自动升级。
AS32 wireless module. The file format is RJ-FSD-1000. During an upgrade, place the firmware file on the SD card. After power-on, the module will automatically perform the firmware upgrade.